Home > Support > Windows > Dial-up Networking 1.0


my_comp1.gif (1289 bytes) Double-click on the My Computer icon.
ico_du1.gif (522 bytes) Double-click on the Dial-Up Networking folder.
d_prop.gif (3920 bytes) Right-click on the OlyPen icon and select Properties.
p_gen.gif (5949 bytes) On the General tab:

Area code: 1

Telephone number:

Please choose the dial-up number closest to your location:

  • 681-3369 for Sequim / Port Angeles (56k/ISDN)
  • 379-3650 for Port Townsend (56k/ISDN)
  • 379-3650 for Port Townsend (56k/ISDN)
  • 374-9747 for Forks (56k/ISDN)

    Country code: United States (1)

    Use area code and Dialing Properties: checked.

    Connect using: Select the CORRECT modem driver.

    Click on the Server Type... button to configure the server and TCP/IP settings for this connection.

    		•
    p_svr.gif (5489 bytes) On the Sever Types dialog:

    Type of Dial-Up Server: PPP: Windows...

    Enable software compression: Checked.

    TCP/IP: Checked.

    (No other check boxes should have checks!)

    Then, click on the TCP/IP Settings... button.
    p_tcp.gif (6516 bytes) On the TCP/IP Settings dialog:

    Server assigned IP address: Selected.

    Server assigned name server addresses: Selected.

    Use IP header compression: Checked.

    Use default gateway on remote network: Checked.

    **Note**: Some dial-up connections will not work with "Server assigned name server addresses" selected. In these cases, use the following settings:

    Specify name server addresses: Selected.

    Primary DNS: 208.200.248.1

    Secondary DNS: 208.200.248.8

    Primary WINS: 0.0.0.0

    Secondary WINS: 0.0.0.0


    All Content © 2003 OlyPen